The DriveGuard Integrator™ system (product code: CT-2B system) adds professional car detection
to any security, home automation or lighting system.
When connected to two zone inputs on a security or home automation panel, the DriveGuard Integrator™ will trigger any and all features supported by those systems when vehicles are detected.
Its sensor is buried beside and near the end of the driveway, hidden and vandal-proof. It only detects moving steel, eliminating false alarms caused by animals or blowing objects. Its control unit is installed beside the security or home automation panel.
When integrating vehicle detection with a home automation or security system, the following will be enabled when vehicles drive into the driveway:
This system is recommended for driveways longer than 75 feet.
American made and supported.
Two components make up the DriveGuard Integrator™ system:
1. CT-2B control unit (includes 12 volt transformer)
2. CT-6 sensor probe
• CT-2B control unit
The CT-2B control unit has a single timed output with simplified features. Field adjustments include relay time and sensor probe sensitivity.
It comes in a high quality, white metal enclosure and is usually installed beside the home automation, security or lighting panel for easy integration with those systems.
The CT-2B supports up to four sensor probes.
NOTE: Use the power supply that comes with the CT-2B to power it rather than relying on the home automation or security panel for power.
• CT-6 sensor probe
Sensor Probe Based on magnetometer technology, the CT-6 detects movement in the earth’s magnetic field caused by moving steel. It will not detect animals, people or blowing objects. Wind and weather do not affect it. This makes it virtually false-alarm proof. It does not require power.
The CT-6 sensor probe should be buried 6-10 inches underground, toward the end, beside, and parallel to, the driveway. It covers a 12′ wide driveway from the side. Wider driveways will require more than one sensor probe. It has direct burial cable attached, making conduit unnecessary. The cable is buried 3-6 inches underground, up to and into the house. It is connected to the control unit.
The CT-6 comes with a custom length of direct burial cable attached in increments of 50′ from 100′ to 500′; comes in increments of 100′ from 500′ to 3000′. The cable is polyurethane coated, making repair-splicing in the field possible.
DriveGuard Integrator™ Technical Specs