Product Overview

Product Overview

Below is a list of Cartell systems with their product components. Please note: these systems do not come as “kits.” Components must be purchased separately to make a complete system.

Full Product Manual

Driveway Systems

DriveGuard – Basic system with one relay contact
Made up of three components:
1. CT-2B control unit in metal enclosure (includes transformer)
2. CT-6 sensor with custom amount of cable, up to 3,000 feet (accepts up to 4 sensors per control unit)
3. CT-A1, and/or AA-1, and/or CT-11 outdoor sounder (accepts up to 12 sounders per control unit)
DriveGuard Tech Sheet
DriveGuard Manual
To learn more about individual components, go to our Component Overview page.

DriveGuard Ultra – Full featured system with one relay and one 15 amp light circuit
Made up of three components:
1. CF-2C control unit in metal enclosure (includes transformer and photocell)
2. CT-6 sensor with custom amount of cable, up to 3,000 feet (accepts up to 100 sensors per control unit)
3. CT-A1 and/or CT-11 outdoor sounder (accepts up to 12 sounders per control unit)
Ultra Tech Sheet
Ultra Manual
To learn more about individual components, go to our Component Overview page.

DriveGuard Integrator – Interfaces with any security/home automation system
Made up of two components:
1. CT-2B control unit
2. CT-6 sensor with custom amount of cable, up to 3,000 feet
This system will trigger the features your “mother” system supports when a vehicle is detected, including sounders, lights, cameras, interaction with computers, etc.
Integrator Tech Sheet
Integrator Manual
To learn more about individual components, go to our Component Overview page.

Free Exit Systems

GateMate (CP-3) Free Exit System
Self-contained system (no output board) with universal voltage and lowest stand-by current in the industry at 80-130 μA (microamps). Closest competitor sits at 1 mA (milliamp).
Two models: 3-wire (for use with gates that trip to ground to open) and 5-wire (with normally-open or normally-closed relay contacts) and 100 feet of cable attached
GateMate Tech Sheet
GateMate Manual

Pioneer Free Exit System
Integrates with any gate operator for free exit
Made up of two components:
1. CT-3BG control board (conformal coated) to be installed in gate operator
2. CT-6 sensor with custom amount of cable, up to 3,000 feet
Pioneer Tech Sheet
Pioneer Manual
To learn more about individual components, go to our Component Overview page.